Straight-through lightweight slag remover

1. The lightweight slag remover is a latest technological design used to treat the tail slurry of the type 110 reverse lightweight slag remover. Under low concentration conditions, the type 120 lightweight slag remover can effectively remove impurities such as wax, plastic foam, and thermoplastic materials, which have a specific gravity smaller than fibers, from the slurry, and concentrate the light impurities using centrifugal principles. The specialized inlet design ensures rotational stability at the gas core, facilitating impurity separation. Factors such as the pressure generated at the slurry inlet, the shorter movement distance, and the longer residence time within the slag remover contribute to producing a strong centrifugal effect, thereby ensuring maximum slag removal efficiency. Moreover, the high stability of the fluid in the type 120 lightweight slag remover and the lower slurry concentration create an ideal condensing effect. When the impurity content in the raw materials is high, the ideal purification effect can be achieved by increasing the slag discharge amount.

2. The screw high-efficiency heavyweight slag remover is the latest model of screw heavyweight slag remover, inheriting all the advantages of the previous generation while also featuring its own characteristics. The inner wall of the main body adopts a unique spiral conical design, making it easier for the incoming slurry suspension to accumulate and allowing the slurry to flow down in a spiral manner, minimizing wear and improving slag removal efficiency. The slag remover is composed of a segmented structure, with each unit divided into three sections made of thickened, wear-resistant materials for easy disassembly and replacement. The slant arrangement of the slag discharge outlet reduces the pressure of the incoming slurry and the discharge pressure significantly, greatly reducing power consumption. Each slag remover's inlet and outlet pipes and discharge pipes are equipped with valves, which can reduce system downtime and increase flexibility and reliability; the final section is made of composite ceramic wear-resistant material, significantly extending the lifespan of the slag remover.

3. The straight-through lightweight sand remover is a high-efficiency, flow-through type purifier primarily used to remove light impurities from pulp, especially the light impurities in secondary fibers. It is specially designed to remove lightweight impurities with a specific density of less than 1, such as plastic sheets, thermoplastic materials, wax, adhesives, ink dots, etc. Additionally, the slag remover can efficiently remove air, serving as a substitute for expensive degassing equipment.

4. The high-efficiency quality dredger is a forward dredging device that utilizes centrifugal principles to remove impurities from slurries. This product is developed based on advanced technologies from both domestic and international sources, making it a new type of high-efficiency dredger that can be used in various slurry purification systems to eliminate mixed waste, sand, stones, wax, adhesives, plastic sheets, foam, gases, iron filings, and other heavy impurities from the slurry.

5. The parallel-type bidirectional dredger is a new high-efficiency dredging device developed on the foundation of extensively absorbing advanced technologies from both domestic and international sources. It is intended for widespread use in the clearing and separation of fine residues from various pulps and is an indispensable preferred dredging device in the matching and technological transformation of various pulp-making equipment, particularly suitable for paper machine flow systems.