Horizontal double-direction slag remover

1. The lightweight slag remover is a state-of-the-art design used for processing the tailing slurry from the 110 type reverse lightweight slag remover. Under low concentration conditions, the 120 type lightweight slag remover can effectively remove impurities such as wax, plastic foam, and thermoplastic materials from the slurry that have a specific gravity less than that of fibers, while utilizing the principle of centrifugation to concentrate the lightweight impurities. The professional inlet design ensures rotational stability at the gas core, which facilitates impurity separation. Factors such as the pressure generated at the slurry inlet, the smaller movement distance, and the relatively longer residence time within the slag remover contribute to producing a strong centrifugal effect, thereby ensuring maximum slag removal efficiency. Additionally, the high stability of the fluid within the 120 type lightweight slag remover, along with the low incoming slurry concentration, results in an ideal concentration effect. When the impurity content in the raw material is high, the desired purification effect can be achieved by increasing the slag discharge volume.

2. The spiral high-efficiency heavyweight slag remover is currently the latest model of spiral heavyweight slag remover. It inherits all the advantages of the previous generation slag remover while exhibiting its unique characteristics. The inner wall of the main body adopts a unique spiral cone design, which facilitates the accumulation of incoming slurry suspensions and allows the slurry to flow down in a spiral manner, minimizing wear and enhancing slag removal efficiency. The slag remover unit is designed with a segmented structure, with each slag remover divided into three sections made of thick, wear-resistant materials, facilitating disassembly and replacement. The diagonally arranged slag discharge outlet reduces both the incoming slurry pressure and the slag discharge pressure, significantly lowering power consumption. Each slag remover is equipped with valves on the inlet and discharge pipes, which reduces system downtime and increases flexibility and reliability. The final sections use composite ceramic wear-resistant materials, greatly extending the lifespan of the slag remover.

3. The straight-through lightweight sand remover is a high-efficiency, concurrent flow purifier primarily used to remove lightweight impurities from pulp, especially light impurities in secondary fibers. It is specifically designed to eliminate lightweight impurities such as plastic sheets, thermoplastic materials, wax, adhesives, ink dots, and other substances with a relative density of less than 1. Additionally, the slag remover can efficiently remove air, serving as a cost-effective alternative to expensive degassing equipment.

4. The high-efficiency heavyweight slag remover is a forward slag remover that employs centrifugal principles to eliminate impurities from the slurry. This product is a newly developed, high-efficiency slag remover based on the integration of advanced technologies from both domestic and international sources. It can be used in various slurry purification systems to remove mixed waste, gravel, paraffin, adhesives, plastic sheets, foam, gases, ferrous shavings, and other heavyweight impurities from the slurry.

5. The parallel dual-direction slag remover is a novel high-efficiency slag remover developed based on extensive absorption of advanced technologies from both domestic and international sources. It is intended for widespread use in cleaning and separating fine residues from various types of pulp, making it an essential choice for various pulp-making equipment and technological upgrades, particularly suitable for paper machine stock preparation systems.